22
AES-3981 Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 3: Operation
Operator and All List Parameters
The All List is a long flat list of all the available parameters, arranged
from the most-used to the least-used. It is intended for a “Supervisor”
security designation. The Operator List is a condensed version of the
All List, and is intended for an “Operator” security designation
.
•
The AES-3981 parameters listed on
page 22
through
page 23
are
sorted in the order that they appear in the Operator and/or All List.
•
Default values are marked with an asterisk (*).
•
Parameters accessed only from within the All List are shaded in
gray.
•
Parameters with the symbol
[RO]
are
read-only.
Read-only
parameter default values are not highlighted, as they report system
status indicators.
•
Information in brackets provides further explanation of a parameter.
This information will not appear on the card edge.
See
“Navigating the Operator and All Lists” on page 21
for instructions
on navigating this list using card-edge controls.
Note
You can reset the default values
for all of the parameters
automatically via the
FctryRcl
parameter.
Table 3-1.
Operator and All List Parameters
Card-Edge ID
Parameter Name
Description
User Range
Reclk Mode
Reclock mode
Reclocking mode select
• Auto*
• Reclocked
• Bypass
EQ_Mode
Input EQ mode
Input equalization mode
• Auto EQ*
• Manual EQ
EQ_Adj
Input EQ adjustment
EQ adjustment for input
cable length
0 to 600 (300*)
BM_Type
[RO]
Back module type
Back module type
detection
• Coax BM
• Bal BM
• Invalid BM
• Absent BM
Frame Rate
[RO]
AES frame rate
AES frame rate detection
• 96 kHz
• 88.2 kHz
• 48 kHz
• 44.1 kHz
• 32 kHz
• Fs unknown
Summary of Contents for AES-3981
Page 2: ......
Page 56: ...44 AES 3981 Installation and Operation Manual Index...
