background image

Appendix C 

 Open Source Software Copyright Information 

 

114

 

CMN-41 Series Installation and Operation Handbook 

Copyright © 2009, Harris Corporation 

Networks Associates Technology, Inc. Copyright 
Notice (BSD) 

Copyright © 2001-2003, Networks Associates Technology, Inc. All rights reserved. 
Redistribution and use in source and binary forms, with or without modification, are 
permitted provided that the following conditions are met: 

 

Redistributions of source code must retain the above copyright notice, this list of 
conditions and the following disclaimer. 

 

Redistributions in binary form must reproduce the above copyright notice, this list 
of conditions and the following disclaimer in the documentation and/or other 
materials provided with the distribution. 

 

Neither the name of the Networks Associates Technology, Inc. nor the names of its 
contributors may be used to endorse or promote products derived from this 
software without specific prior written permission. 

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED.. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
LOSS OF USE, DATA, OR PROFITS;OR BUSINESS INTERRUPTION) 
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN 
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 

Summary of Contents for CMN-41









































































































































































Reviews: