MM-015371-001, Rev. C
63
13.2 HEADSET ADAPTER CABLE CA-012349-002
As described in Section 11 of this manual, Headset Adapter Cable CA-012349-002 is required to connect
a headset or a portable radio (via belt box) to the M5300/M7300 mobile radio. The cable’s assembly
diagram is shown in Figure 13-2 below.
The cable’s male 44-pin D-subminiature (DB-44) connector, identified P1, mates with the female DB-44
connector on the rear of the radio.
The cable’s female DB-25 connector, identified J1, mates to the male DB-25 connector of Accessory
Cable 19B802554P24. Refer to Section 11 for additional information. Accessory Cable 19B802554P24
is illustrated in Section 13.3 that follows.
ASSEMBLY DIAGRAM
WIRING DIAGRAM
PARTS LIST
(
Made From PS-CA-012349 Rev. A)
Figure 13-2: Headset Adapter Cable CA-012349-002
