NEXIO AMP
Hardware Installation and User Guide
41
©2011 Harris Corporation. All rights reserved.
NXESB624
NXESB648
Redundant Ethernet protects NEXIO LAN traffic (internode
communications) only. It does not protect FTP, Protocol, or Proxy
communications.
Ethernet 1 Port Configuration (redundant)
The following shows the default configuration from the factory:
Configured as a primary LAN communications port for NEXIO network traffic
Supports Ethernet based automation control
If you are using a direct connection:
1
In
NEXIO Config
, click the
IP Config
tab (see page 82).
2
In the
Role
list, select
NXLAN 1
for Ethernet 1.
If you are using a Media Host architecture:
1
In
NEXIO Config
, click the
IP Config
tab (see page 82).
2
In the
Role
list, select
Not Assigned
for all Ethernet connections.
3
In the
Hi-Res Net Server (MIOH)
area, enter the IP address for Host 1 and Host 2.
Ethernet 2 Port Configuration (redundant)
The following shows the default configuration from the factory:
Configured as a redundant LAN communications port for NEXIO network
traffic
Supports Ethernet based automation control
If you are using a direct connection:
1
In
NEXIO Config
, click the
IP Config
tab (see page 82).
2
In the
Role
list, select
NXLAN 2
for Ethernet 2.
If you are using a Media Host architecture:
1
In
NEXIO Config
, click the
IP Config
tab (see page 82).
2
In the
Role
list, select
Not Assigned
for Ethernet 2.
3
In the
Hi-Res Net Server (MIOH)
area, enter the IP address for Host 1 and Host 2.
Summary of Contents for NEXIO AMP NX3801HDX
