NEXIO AMP
Hardware Installation and User Guide
75
©2011 Harris Corporation. All rights reserved.
c
In the
Line Select
list, select the desired line for the VITC output (i.e., 10,
11, 12, 13, 14, 15, 16, 17, 18, 19, or 20). This option is only applicable for
SD-only clips and if VITC insert is selected.
d
Select the
Duplicate line 0
check box if desired to add a duplicate line of
the VITC output 2 lines later. For example, if you have VITC output on line
16, a duplicate of the output will appear on line 18. This option is only
applicable for SD-only clips and if VITC insert is selected.
e
Select the
Legacy timecode display
check box to report a channel’s
current output timecode based on the start time of a currently playing clip
instead of the embedded timecode within the clip.
Record Format and ARC
a
In the
Format
list, select the appropriate record format.
b
In the
Bit Rate (Mbps)
list, select the appropriate bit rate for the format.
c
Click the appropriate
Record Aspect
option.
d
Select the
Record VBI
check box if you want to record the VBI
information.
e
Click the appropriate
GOP
option, and select the
M
and
N
value if
applicable.
Summary of Contents for NEXIO AMP NX3801HDX
