QSEE6800
+
H Installation and Operation Manual
13
Chapter 2: Installation
:
Dual-Network QSEE6800
+
H Configuration
In a dual-network configuration (shown in
), low-volume
control and monitoring inputs are separate from high-volume streaming
inputs.
This configuration includes frames connected to two switches. One
switch carries streaming-related data such as MPEG-4, thumbnails and
line-sampling data, while the other switch carries control and
monitoring information.
Figure 2-4.
Dual-Network Configuration
In this configuration, you can reliably monitor up to 24 QSEE6800
+
H
modules without SNMP enabled, or 20 QSEE6800
+
H modules if
SNMP is enabled.
Table 2-3.
Maximum Number of QSEE6800
+
H Modules Per Configuration
Configuration Description
With SNMP Enabled
Without SNMP Enabled
MPEG-4 and
Thumbnails
Thumbnails
Only
MPEG-4 and
Thumbnails
Thumbnails
Only
Low-resolution thumbnails, with
line sampling and audio disabled
18
20
22
24
High resolution thumbnails, with
line sampling and audio enabled
8
10
8
10
Note
In this configuration, the PC
running Pilot or Navigator must
have two network cards.
Com
3
Pilot / Navigator PC
Frame containing
module
Streaming inputs
from Q
modules
Control/monitoring
inputs from
module
Two network cards,
one for each input
Com
3
coax
