QSEE6800
+
H Installation and Operation Manual
41
Chapter 4
CCS Operation
Overview
When using CCS software, such as Pilot or Navigator, you can view a
QSEE6800
+
H
Streaming Control
window. This window can contain
up to 8 thumbnails, plus an MPEG-4 player if you have the
QSEE6800
+
HS option. You can set and monitor SQM parameters and
alarms for each input to the module.
In addition, in Navigator you can create a
Graphical Navigation
window with up to 32 thumbnails and 4 MPEG-4 players (with the
QSEE6800
+
HS option). Thumbnails can provide a visual identification
for which input has triggered an alarm.
This chapter assumes a basic knowledge of how to use CCS software.
See the Pilot or Navigator user guides and online help for detailed
information on such functions as discovery, changing modes, and using
the Navigation pane.
While you can discover QSEE6800
+
H in CCS CoPilot, you cannot
view streaming video or set or monitor SQM parameters and alarms.
The following topics are discussed in this chapter:
•
“CCS PC System Requirements” on page 42
•
•
H Modules in Pilot or Navigator” on
•
Pages in Navigator” on page 47
•
“Launching the QuickTime Player Outside Your CCS Software” on
page 53
Note
You must have CCS Pilot or
Navigator 3.2 or later to use the
full features of the
QSEE6800
+
H module.
