48
QSEE6800
+
H Installation and Operation Manual
Chapter 4: CCS Operation
Building a QSEE6800
+
Page Using the Wizard
A wizard helps you create a streaming page in Navigator (you can’t
make a streaming page in Pilot). Pages are built in Build mode. Follow
this procedure:
1. From the main menu, choose
File
>
New
. The
New Page
wizard
opens.
2. Click on the
Quality Control
tab, and then double click the
Multi-Monitor View
icon.
The Page Wizard (step 1 of 2) opens.
3. Click
Add
to open a
Device Selection
window.
4. Select a QSEE6800
+
module, or an input to a QSEE6800
+
module.
On the
Device Selection
screen, you can see all the inputs to the
module.
•
To add an individual input, choose it, and then click
OK
.
•
To add all the inputs for a QSEE6800
+
H module, choose the
module itself, and then click
OK
.
You can only select one item at a time. To add another item, click
Add
again.
On the Step 1 of 2 screen, you can switch the selected input for a
QSEE6800
+
module by clicking the
Input
field. This opens a
drop-down menu that lists
All
plus each of the individual inputs.
To add multiple inputs from the same QSEE6800
+
, select it
multiple times in the
Device Selection
window.
Each input to any particular QSEE6800
+
module can only be
selected once. If, for example, you choose a QSEE6800
+
module,
and an input to that module, you will receive an error message. You
must resolve the problem (by removing one or more inputs from the
list) before you can proceed to Step 2 of 2.
5. Click
Next>>
to proceed to the
Step 2 of 2
screen.
