2
QSEE6800
+
H Installation and Operation Manual
Chapter 1: Introduction
Product Description
The QSEE6800
+
H Signal Monitor Video and Thumbnail Streamer is
part of the 6800
+
series of processing and conversion modules and has
the following features:
•
Up to eight independent HD-SDI/SD-SDI input channels, where
each input can be any supported video standard
•
Alarms for HD/SD video presence and quality, embedded audio (16
channels), and closed captioning presence
•
SQM-customizable alarm criteria for each input including the
following:
•
Choose which alarms to monitor independently for each input
•
Assign alarm priority and alarm threshold levels
•
Receive reported alarm conditions over SNMP (optional)
•
Thumbnails for each of the input video signals
•
View at up to two frames per second
•
Configure thumbnail resolution: 3 preset resolutions for SD and
3 preset sizes for HD, with an aspect ratio fixed at 4×3 or 16×9
(based on video input format)
•
Select the line for which a waveform or vectorscope is
generated (for each input) and view it at one of the preset
thumbnail sizes
•
Video level, audio level, and data package alarms
•
Configurable level/period threshold for audio and video alarms
•
Support for
+
Pilot Lite, Navigator, and Pilot
•
In Pilot or Navigator, simultaneously display eight thumbnails (like
a multiviewer)
•
In CCS Navigator, associate a thumbnail with any hot spot on
Graphical Navigation page
•
Optional high quality “monitoring” MPEG-4 CIF output at up to 30
frames per second
•
Select the channel for real-time monitoring and alarms
•
View eight thumbnails in Pilot or Navigator
•
In Navigator, associate thumbnails and/or MPEG-4 streams
with a hotspot on the
Graphical Navigation
page
