QSEE6800
+
H Installation and Operation Manual
31
Chapter 3: Card-Edge and Parameter Operation
SQM Settable Parameters
Table 3-4
lists the SQM settable parameters for each input to
QSEE6800
+
H module.
All parameters clip unless otherwise indicated
.
Legend
Bold
option = Indicates that this is the default setting for the parameter.
Table 3-4.
SQM Settable Parameters
Parameter Name
Parameter Description
Range
SDI Expected Video
Format
Selects the expected format(when the format deviates
from this format, one of the
SDI Format Changed To
alarms triggers)
• 525
• 625
• 1080i
• 1080p
• 720p
Luminance Low
Threshold
Sets the threshold below which the
alarm is triggered
-6.8% to +15% of nominal
100% level (
7.5%
)
Luminance Peak
Threshold
Sets the threshold at which excessive luminance
triggers the
90% to 108% of nominal
100% level (
102%
)
Chrominance Low
Threshold
Sets the threshold below which the
alarm is triggered
0% to +15% of nominal
100% level (
0%
)
Chrominance Peak
Threshold
Sets the threshold at which excessive chrominance
level meets or exceeds the value chosen here,
alarm is triggered
90% to 108% of nominal
100% level (
102%
)
Video Black Threshold Sets the threshold below which the
alarm is triggered
0% to 10% of nominal
100% level (
5.5%
)
Peak Audio Threshold
Sets the threshold above which
-20 to 0 dBFS (
-2 dBFS
)
Low Audio Threshold
Sets the threshold below which
-80 to -30 dBFS (
-60
dBFS
)
Loss of Sound
Threshold
Sets the the threshold below which
-100 to -60 dBFS (
-90
dBFS
)
Audio Average Level
Reporting
Enables audio average level reporting
•
Disable
• Enable
D-VITC Line Select
Selects the line for D-VITC presence reporting
• 525: 1 - 525 (
14
)
• 625: 1-625 (
19
)
