44
QSEE6800
+
H Installation and Operation Manual
Chapter 4: CCS Operation
Controlling QSEE6800
+
H Modules in Pilot or
Navigator
There is a Control window for each QSEE6800
+
module. There is also
a Control window for each input to the QSEE6800
+
module.
Using the QSEE6800
+
H Control Window
To open the QSEE6800
+
module’s control window, while in Control
mode, double click on the QSEE6800
+
module in the
Navigation
pane.
The QSEE6800
+
control window has three tabs:
•
Stream tab (see
•
Display tab (see
•
Network tab (see
The
QSEE6800
+
Specific Control
window displays thumbnails for all
the inputs into the module.
Figure 4-2.
Control Window Display Tab for QSEE6800
+
If an input is not connected, the thumbnail or MPEG-4 stream window
will display “No Video Source.”
Waveform display
Vectorscope display
MPEG-4 stream is
optional; see your sales
representative for more
information
