52
QSEE6800
+
H Installation and Operation Manual
Chapter 4: CCS Operation
You can also drag the corners of a thumbnail or MPEG-4 stream to
resize it.
If you choose two thumbnails, you have additional options of
Same
Size
,
Same Width
, and
Same Height
. These options set the resolution
of all selected thumbnails to match the selected proportion of the
last-selected thumbnail.
When you switch to Build mode, you can click on a thumbnail and drag
it to an MPEG-4 streaming box to immediately stream the video from
that input.
Alarms Monitoring
In addition to the diagnostics window, alarms are indicated on the
borders for both thumbnails and MPEG-4 streaming video on
Graphical Navigation
pages.
Figure 4-7.
QSEE6800
+
Thumbnail
The outside border of a thumbnail indicates its alarm level.
To set the global alarm priority for a QSEE6800
+
H module, or for an
input to the module, follow these steps:
1. With Pilot or Navigator in Build mode, right click on the module or
input, and then choose
Configuration
.
Table 4-3.
Alarm Color Indications
Alarm Level
Border Color
No alarm
Black
Warning
Yellow
Critical
Red
Acknowledged
Orange
The outer region of the thumbnail
changes color to indicate an
alarm level
