HART HPSD01, Operator'S Manual

3 – English

 

Hold the power tool by insulated gripping surfaces, 
when performing an operation where the cutting 
accessory may contact hidden wiring. 

Cutting 

accessory contacting a  “live”  wire may make exposed 
metal parts of the power tool  “live” and could give the 
operator an electric shock.

 

Know your power tool. Read operator’s manual 
carefully. Learn its applications and limitations, as 
well as the specific potential hazards related to this 
power tool. 

Following this rule will reduce the risk of 

electric shock, fire, or serious injury.

 

Always wear eye protection with side shields marked 
to comply with ANSI Z87.1 when assembling parts, 
operating the tool, or performing maintenance.

Following this rule will reduce the risk of serious personal 

injury.

 

Protect your lungs. Wear a face or dust mask if the 
operation is dusty. 

Following this rule will reduce the 

risk of serious personal injury.

 

Protect your hearing. Wear hearing protection during 
extended periods of operation.

 Following this rule will 

reduce the risk of serious personal injury.

 

Battery tools do not have to be plugged into an 
electrical outlet; therefore, they are always in 
operating condition. Be aware of possible hazards 
when not using your battery tool or when changing 
accessories. 

Following this rule will reduce the risk of 

electric shock, fire, or serious personal injury.

 

Do not place battery tools or their batteries near fire 
or heat. 

This will reduce the risk of explosion and possibly 

injury.

 

Do not crush, drop or damage battery pack. Do not 
use a battery pack or charger that has been dropped 
or received a sharp blow. 

A damaged battery is subject 

to explosion. Properly dispose of a dropped or damaged 

battery immediately.

 

Batteries can explode in the presence of a source 
of ignition, such as a pilot light. 

To reduce the risk of 

serious personal injury, never use any cordless product 
in the presence of open flame. An exploded battery can 
propel debris and chemicals. If exposed, flush with water 

immediately.

GENERAL POWER TOOL SAFETY WARNINGS

SANDER SAFETY WARNINGS

have the power tool repaired before use. 

Many 

accidents are caused by poorly maintained power tools.

 

Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to 

bind and are easier to control.

 

Use the power tool, accessories and tool bits etc. 
in accordance with these instructions, taking into 
account the working conditions and the work to be 
performed. 

Use of the power tool for operations different 

from those intended could result in a hazardous situation.

 

Keep handles and grasping surfaces dry, clean and 
free from oil and grease. 

Slippery handles and grasping 

surfaces do not allow for safe handling and control of the 

tool in unexpected situations.

BATTERY TOOL USE AND CARE

 

Recharge only with the charger specified by the 
manufacturer. 

A  charger  that  is  suitable  for  one  type 

of battery pack may create a risk of fire when used with 
another battery pack.

 

Use power tools only with specifically designated 
battery packs. 

Use of any other battery packs may create 

a risk of injury and fire.

 

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, nails, 
screws or other small metal objects, that can make a 
connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.

 

Under abusive conditions, liquid may be ejected from 
the battery; avoid contact. If contact accidentally 
occurs, flush with water. If liquid contacts eyes, 
additionally seek medical help. 

Liquid ejected from the 

battery may cause irritation or burns.

 

Do not use a battery pack or tool that is damaged or 
modified. 

Damaged  or  modified  batteries  may  exhibit 

unpredictable behavior resulting in fire, explosion or risk 

of injury.

 

Do not expose a battery pack or tool to fire or 
excessive temperature. 

Exposure to fire or temperature 

above 265° F may cause explosion.

 

Follow all charging instructions and do not charge the 
battery pack or tool outside the temperature range 
specified in the instructions. 

Charging improperly or at 

temperatures outside the specified range may damage 

the battery and increase the risk of fire.

SERVICE

 

Have your power tool serviced by a qualified repair 
person using only identical replacement parts. 

This 

will ensure that the safety of the power tool is maintained.

 

Never service damaged battery packs. 

Service 

of  battery  packs  should  only  be  performed  by  the 
manufacturer or authorized service providers.