4 – English
SPECIFIC SAFETY RULES
Always ease the workpiece against the abrasive
wheel
when starting to grind. A harsh impact can break
the wheel. Use light pressure when starting to grind; too
much pressure on a cold wheel can cause the wheel to
crack.
Risk of injury due to accidental starting. Do not
use in
an area where children may be present.
Never start the grinder
when the wheel is in contact with
the workpiece.
Secure work.
Always hold workpiece firmly against the
work rest.
Do not use the bench grinder
if the flange nut or clamp
nut is missing or if the spindle shaft is bent.
Frequently clean
grinding dust from beneath grinder.
Secure long hair
so it is above shoulder level to prevent
entanglement in any rotating parts.
Stay alert and exercise control.
Watch what you are
doing and use common sense. Do not operate tool when
you are tired. Do not rush.
Do not touch
the cut material until it cools or you can be
burned.
If the power supply cord is damaged,
it must be
replaced only by the manufacturer or by an authorized
service center to avoid risk.
Make sure the grinder is securely mounted
as
described in the assembly instructions before connecting
the tool to a power supply.
Save these instructions.
Refer to them frequently and
use to instruct other users. If you loan someone this tool,
loan them these instructions also.