VVP10 HART
HART
®
VALVE POSITIONER
INSTALLATION, OPERATION, CONFIGURATION AND MAINTENANCE MANUAL
______________________________________________________________________________________________________________________________
10
Figure 2.3 identifies the input and output connections for the supply air that will move the positioner. When the
positioner is used in a single action set, simply close output 2 using the supplied plug (item 13 in figure 4.1), turning
the valve into a 3-way system (figure 2.4).
Figure 2.3 – Pneumatic connections for VVP10.
Figure 2.4 – Plug for single action.
In addition, the positioner has two pressure plugs on one side (see figure 2.5) to adjust the pilot pressure. Vivace
provides the manometer and device specific for this calibration as optional items. For more information about this
procedure, refer to the specific positioner maintenance manual available on the Vivace website.
Figure 2.5 – Pneumatic calibration device for VVP10.
VVP10 is a field device that can be installed by means of its
own bracket in the actuator of the set to be used (linear or
rotary). For details on available brackets, see section 2.6.
VVP10 LCD liquid crystal display can be rotated 4 x 90° so
that the display is as accurate as possible for easy viewing.
Figure 2.6 illustrates the possible rotation of the LCD of the
VVP10.
Figure 2.6 –Display LCD 4 x 90° rotation.
