VVP10 HART
HART
®
VALVE POSITIONER
INSTALLATION, OPERATION, CONFIGURATION AND MAINTENANCE MANUAL
______________________________________________________________________________________________________________________________
15
Linear 100
Option
3
on Ordering Code
Used on linear systems of 70 mm to 100 mm, with measurement from 0 to 100 mm (minimum span of 70 mm between
inferior and superior points).
Linear 150
Option
4
on Ordering Code
Used on linear systems of 100 mm to 150 mm, with measurement from 0 to 150 mm (minimum span of 100 mm
between inferior and superior points).
Figure 2.17 – Dimension and assembly of the three linear magnet models.
