adjust the back rest to incline the seat frame
Tilt the adjustment lever
13 at the rear to bring the seat frame from the
sitting to the lying position in two stages.
adjusting the footrest
By pressing the two red safety buttons
15 at the same time, the footrest
can be lowered. When lifting it, adjustment of positions is effected
automatically.
safety belt
WARNING!
Secure your child with the five-point harness system
14.
Make sure the shoulder straps
d are plugged in and that the belt is
securely fastened. The length of the belt can be adjusted with sliding
buckle
f, the length of the crotch strap G can be adjusted with
quick-release slider
H.
To undo the harness: press the two tongues
B together using your
thumb and forefinger, then press the red button
a, so that you can pull
the two plugs
e out upwards. To undo the shoulder straps you then
press button
C.
automatic locking of the upper section
Place the seat frame on the chassis so that the two upper fastening com-
ponents rest on the locking bolts provided for this purpose. Both sides of
the lock mechanism
17 will automatically close when you press the seat
frame down.
WARNING!
ensure that the seat frame is securely in place
before use!
To release the lock mechanism, press the safety button to the right of the
release button
19 on the back of the inclining seat frame and then press
the release button until the release is activated.
Grasp the hoop guard with your other hand to remove the seat frame.
Instructions for use
9
14
G
f
d
H
a
B
C
e
f
