Instructions for use
WARNING!
When opening out and folding down the frame and when adjusting the back-rest,
pinch-points may be caused in which fingers etc. can be trapped unless care is exercised. Ensure that
your child has plenty of clearance space.
unfolding the pushchair
Press the locking buttons of the handlebar hinge
9 on both sides and position the handlebar horizontally.
Release the handlebar from the transport clips and pull the pushchair upwards.
folding the pushchair
Remove the sports buggy insert!
Undo the locking devices
2 on both sides by pressing the release buttons 3a
and pulling the locking mechanism
3 upwards.
Lift the frame and turn the front wheels inwards, so that the transport restraint
can lock into position on both sides. Swing the handlebar inwards
Height-adjustable handlebar grip
Press the locking buttons of the handlebar hinge
9 on both sides and move the
top part of the handlebar into the required position.
Changing the rear wheels
Release the parking brake
7. Depress push button 4 and pull the wheel off.
Push the wheel right to the axle‘s stop. Please ensure that all wheels are locked
in position correctly.
Changing the swivel wheels
To remove, press the pushbutton
6a on the inside of the swivel wheel
bracket
6 and pull the wheel out of the bracket. To assemble the
wheel, insert the fastening pin in the holding device, and engage it
by a forcible push, which is indicated by a click sound.
lock-type-swivel wheels
To lock the swivel wheels, fold the control lever
5 downwards, the wheels lock
automatically on both sides as soon as they are in the direction of travel.
To release, fold the control lever
5 into the horizontal position. On very
uneven surfaces, and when going very fast, we recommend locking the
swivel movement, to prevent the wheels from blocking.
parking brake
Push the red brake button
7 to engage the brake. Having parked the
pram, try to push it to check the brake. Push the green brake button
7 to release the brake.
WARNING!
Make sure the brake is always closed when placing
the baby in the carriage or taking it out of it.
adjustable suspension system
By turning the selector
8, a „hard“ or „soft“ position can be selected for suspension.
Hood and safety bar
By pressing the bayonet joint
12, the hood or the safety bar can be pulled out. When inserting it, make sure
the safety bar locks into place correctly and be careful not to pinch any of the fabric parts. By pressing the
buttons
11, the safety bar position can be changed.
WARNING!
The hood bar of the sports buggy is not suitable for carrying the sports buggy.
8
7
8
8
5
3
3a
6
6a