background image

HARTMANN TRESORE

10

Activating the first number group

Enter 

“clear clear”

“PROG”

 appears in the display. As soon as the display goes out, enter 

the function code 

7-5-1-0-1-9

The first number group appears and can be changed. The preset is:

(A) Displaying or hiding code

Digit 

“0”

 means that the code is replaced with dashes.

Digit 

“1”

 means that the code entered is shown as normal in the display.

(B) How many digits should a guest code comprise

Digit 

“3”

 means that the guest code must have 3 digits.

Digit 

“4”

 means that the guest code must have 4 digits.

Digit

 “5”

 means that the guest code must have 5 digits.

Digit 

“6”

 means that the guest code must have 6 digits.

Digit 

“7”

 means that the guest can choose any code with 3 to 6 digits.

(C) Duration of hold time after 4 consecutive failed attempts to open

Digit 

“0”

 means there is no hold time.

Digit 

“1”

 means there is a hold time of 15 minutes.

Digit 

“2”

 means there is a hold time of 30 minutes.

(D) Using the master code (emergency opening with master card when guest code is 
unknown)

Digit 

“0”

 Master code deactivated – external power supply via CEU only.

Digit 

“1”

 Master code input activated – power supply is external and via CEU.

Digit 

“2

” Master code deactivated – external power supply deactivated.

Digit 

“3”

 Master code activated – external power supply deactivated.

(E) Saving the last 100 operations

Digit 

“0”

 – only the openings are tracked.

Digit

 “1”

 – openings and closures are tracked.

(F) Private use / hotel use

Digit “0” – private use:

The user code is stored once. To lock, you only need to press

 “close”

.

The user code can be changed as follows:
While the door is open, enter 

“clear clear 68 close”

.

 “NEW”

 appears in the display.

Enter a new user code and press 

“close”

 to confirm.

Digit “1”, hotel usage:

Every time the safe is closed, a personal code must be entered and 

“close”

must be pressed to confirm.

Digit “2” – advanced private use:

Use is as in the case of private use. In this mode, however, the user code is automatically 
deleted once the door is open for at least 5 minutes.

1

A

7

B

1

C

3

D

0

E

1

F

Summary of Contents for HS 420 Series

















Reviews: