HARTMANN TRESORE
4
• Check the safe for any defects and make sure all the accessories included are
complete before putting it into operation.
• The safe must be screwed securely to a surface. The fixing material is included
with the delivery.
• Insert the batteries supplied into the battery compartment. The battery compartment
is on the rear of the door.
• Either
“Secure”
appears in the display, meaning that the system is in start mode,
or
“Error”
, meaning that there is an error.
• Once
“Okay”
appears, the safe is ready to use.
• If no further action is performed after a key operation, all previously performed
actions are deleted after a few seconds/minutes and the initial state is restored.
• Incorrect inputs can be corrected using the
“clear”
key.
PLEASE NOTE!
For your own security, please change the factory code to your own
personal master code without delay (see chapter 8).
Please obtain the factory setting for the master code directly from
HARTMANN TRESORE.
For various additional functions, you need a reader, which can be purchased
as an option (
see chapter 8
).
To purchase one, please contact HARTMANN TRESORE.
3 | PUTTING INTO OPERATION
!
