HARTMANN TRESORE
5
• Check the safe for any defects and make sure all the accessories included
are complete before putting it into operation.
• The safe must be screwed securely to a surface.
The fixing material is included with the delivery.
• Insert the batteries supplied into the battery compartment.
The battery compartment is on the rear of the door.
• Either
“Secure”
appears in the display, meaning that the system is in start mode,
or
“Error”
, meaning that there is an error.
• Once
“Okay”
appears, the safe is ready to use.
• If no further action is performed after a key operation, all previously performed actions
are deleted after a few seconds/minutes and the initial state is restored.
• Incorrect inputs can be corrected using the
“clear”
key.
Optionally, the RFID cards included in the delivery can be used to
open/close the safe (see following chapters).
PLEASE NOTE!
For your own security, please change the factory code to your own personal master
code without delay (see chapter 9). Please obtain the factory setting for the master
code directly from HARTMANN TRESORE.
For various additional functions, you need a reader, which can be purchased as an option
(
see chapter 8
). To purchase one, please contact HARTMANN TRESORE.
3 | PUTTING INTO OPERATION
!
