background image

3

USING THE ARCORAIL

The ArcoRail horizontal bar can rotate 360°, locking safely and firmly in 
four 90° positions.
1.

Changing the direction of the horizontal bar.

2.

Entering and Exiting the bed.

To enter or exit the bed hold onto both the vertical bar and the
horizontal bar. It will be easier if you sit on the bed beside the
ArcoRail away from the head of the bed.

3.

Using the ArcoRail to sit up or reposition on the bed.

The ArcoRail can be used to sit up, move, reposition or lay down
on the bed. Swivel the ArcoRail to the most comfortable position
for you and grab it to assist you when you are moving.

4.

Maintenance:

• Regular maintenance and cleaning will improve the safety

and durability of your ArcoRail.

• Periodically make sure that all the bolts are tight.
• Always make sure that the mattress is tight against the

vertical post.

2 of 13

REPLACE THIS WITH NEW WORDING

To rotate the horizontal bar to 
another position:
a.

Grip the ArcoRail and pull up.
Turn the ArcoRail to the new
desired position.

b. When the ArcoRail is in the new

position  let it move back down
into the new position.

c.

Try moving the horizontal bar
from side to side to make sure
that the ArcoRail is locked into
the new position.

HANDRAIL

MATTRESS

BASE

Summary of Contents for AR250











Reviews: