Propeller Owner’s Manual
139
INSTALLATION AND REMOVAL
61-00-39
Page 3-5
Rev. 17 Apr/20
1. Tools, Consumables, and Expendables
The following tools, consumables, and expendables will be
required for propeller removal or installation:
A. Tooling
Each propeller model requires a calibrated torque wrench,
safety wire pliers (alternate: safety cable tool), and the model
specific tooling listed below:
HC-B3( )(A,N,P)-2( )
• Torque wrench adaptor (Hartzell Propeller Inc.
P/N AST-2877)
• 5/8 inch deep well socket
• 1-7/16 inch crowfoot wrench
HC-B(3,4,5)( )(A,N,P)-3( )
• Torque wrench adaptor (Hartzell Propeller Inc.
P/N AST-2877)
• 5/8 inch deep well socket
• 1-7/16 inch crowfoot wrench
• Feeler gage
• Beta system puller (Hartzell Propeller Inc. P/N CST-2987)
HC-B(3,4)( )W-3( )
• Torque wrench adaptor (Hartzell Propeller Inc.
P/N AST-3175)
• Torque check tool (Hartzell Propeller Inc. P/N AST-2968-1)
• Feeler gage
• Beta system puller (Hartzell Propeller Inc. P/N CST-2987)
• 5/8 inch deep well socket
• 1-7/16 inch crowfoot wrench
HC-B5M( )-2
HC-B(3,4,5)( )-5( )
• Torque wrench adaptor (Hartzell Propeller Inc.
P/N AST-2877)
• One inch deep well socket
• 1-13/16 inch crowfoot wrench
