Propeller Owner’s Manual
139
MAINTENANCE PRACTICES
61-00-39
Page 6-3
Rev. 17 Apr/20
1. Cleaning
(Rev. 1)
CAUTION 1: INSTRUCTIONS AND PROCEDURES IN
THIS SECTION MAY INVOLVE PROPELLER
CRITICAL PARTS. REFER TO THE
INTRODUCTION CHAPTER OF THIS
MANUAL FOR INFORMATION ABOUT
PROPELLER CRITICAL PARTS. REFER TO
THE ILLUSTRATED PARTS LIST CHAPTER
OF THE APPLICABLE OVERHAUL MANUAL(S)
FOR THE IDENTIFICATION OF SPECIFIC
PROPELLER CRITICAL PARTS.
CAUTION 2: BEFORE CLEANING THE PROPELLER,
BE SURE THE PROPELLER HAS BEEN
INSPECTED IN ACCORDANCE WITH THE
REQUIRED PERIODIC INSPECTIONS
SPECIFIED IN THIS MANUAL. CLEANING THE
PROPELLER PRIOR TO INSPECTION MAY
REMOVE EVIDENCE OF A CONDITION THAT
REQUIRES CORRECTIVE ACTION.
CAUTION 3: DO NOT USE PRESSURE WASHING
EQUIPMENT TO CLEAN THE PROPELLER
OR CONTROL COMPONENTS. PRESSURE
WASHING CAN FORCE WATER AND/OR
CLEANING SOLVENTS PAST SEALS, AND
CAN LEAD TO INTERNAL CORROSION OF
PROPELLER COMPONENTS.
