Propeller Owner’s Manual
147
INSTALLATION AND REMOVAL
61-00-47
Page 3-39
Rev. 17 Sep/20
F. Installing HC-E5A-2 Propeller on the Aircraft Engine
WARNING:
MAKE SURE THE SLING IS RATED UP TO
800 LBS (363 KG) TO SUPPORT THE
WEIGHT OF THE PROPELLER ASSEMBLY
DURING REMOVAL.
CAUTION 1: WHEN INSTALLING THE PROPELLER
ON THE AIRCRAFT, DO NOT DAMAGE
THE ICE PROTECTION SYSTEM
COMPONENTS, IF APPLICABLE.
CAUTION 2:
INSTRUCTIONS AND PROCEDURES
IN THIS SECTION MAY INVOLVE
PROPELLER CRITICAL PARTS. REFER
TO THE INTRODUCTION CHAPTER
OF THIS MANUAL FOR INFORMATION
ABOUT PROPELLER CRITICAL PARTS.
REFER TO THE ILLUSTRATED PARTS
LIST CHAPTER OF THE APPLICABLE
OVERHAUL MANUAL(S) FOR THE
IDENTIFICATION OF SPECIFIC
PROPELLER CRITICAL PARTS.
CAUTION 3: USE CARE WHEN HANDLING THE
PROPELLER TO AVOID CONTACTING
THE PROPELLER MOUNTING STUDS.
IF THE STUDS ARE LOOSENED, THEY
MAY BE PUSHED TOWARD THE INSIDE
OF THE HUB, WHICH WILL REQUIRE
PARTIAL DISASSEMBLY OF THE
PROPELLER BY A PROPELLER REPAIR
SHOP TO RESET THE MOUNTING STUD
LOCATION.
(1) With a suitable crane hoist and sling, carefully move the
propeller assembly to the aircraft engine mounting flange.
(a) Some propellers may require installation of an
accessory drive pulley. If installation procedures
are not in this manual, refer to the aircraft
manufacturer’s instructions.
