Propeller Owner’s Manual
147
INSTALLATION AND REMOVAL
61-00-47
Page 3-10
Rev. 16 May/20
Torquing Sequence for Propeller Mounting Bolts/Nuts
Figure 3-3
N, P or W Flange
SEQUENCE A
SEQUENCE B
Use Sequence A for steps one and two.
Use Sequence B for step three.
Step 1
- Torque all bolts/nuts to 40 Ft-Lbs (54 N•m).
Step 3
- Torque all bolts/nuts
Step 2
- Torque all bolts/nuts to 80 Ft-Lbs (108 N•m).
to Table 3-2.
A or B Flange
W10107C, W10107B, W10108C, W10109B
SEQUENCE A
SEQUENCE B
Use Sequence A for steps one and two.
Use Sequence B for step three.
Step 1
- Torque all bolts/nuts to 40 Ft-Lbs (54 N•m).
Step 3
- Torque all bolts/nuts
Step 2
- Torque all bolts/nuts to 80 Ft-Lbs (108 N•m).
to Table 3-2.
