Propeller Owner’s Manual
147
INSPECTION AND CHECK
61-00-47
Page 5-30
Rev. 17 Sep/20
J. Counterweight Clamps
NOTE: If the counterweight clamp has been painted, the
painted surfaces must be examined in accordance
with the following steps.
(1) Visually examine the painted surfaces of the
counterweight clamps for any damage that penetrates
the paint.
(a) Any damage that penetrates the painted surface
of the counterweight clamp must be repaired in
accordance with the following steps:
1 Using acetone, #700 lacquer thinner, or MEK,
clean the affected area of the counterweight
clamp.
2 Apply approved touch-up paint to the affected
area.
a Refer to Table 6-1, “Approved Touch-up
Paints”.