Propeller Owner’s Manual
147
INSTALLATION AND REMOVAL
61-00-47
Page 3-5
Rev. 17 Sep/20
1. Tools, Consumables, and Expendables
A. General
(1) The following tools, consumables, and expendables will
be required for propeller removal or installation:
B. Tooling
A Flange
• Safety wire pliers (Alternate: Safety cable tool)
• Torque wrench
• Torque wrench adapter
(Hartzell Propeller Inc. P/N AST-2877 that use bolt)
(Hartzell Propeller Inc. P/N AST-2877-1 that use nut)
B Flange
• Safety wire pliers (Alternate: Safety cable tool)
• Torque wrench
• Torque wrench adapter
(Hartzell Propeller Inc. P/N AST-2877)
N Flange
• Safety wire pliers (Alternate: Safety cable tool)
• Torque wrench
• Torque wrench adapter
(Hartzell Propeller Inc. P/N AST-2877 or P/N AST-2877-1
as applicable)
P Flange
• Safety wire pliers (Alternate: Safety cable tool)
• Torque wrench
• Torque wrench adapter
(Hartzell Propeller Inc. P/N AST-2877-2 for HC-E5P-3)
(Hartzell Propeller Inc. P/N AST-2877-1 that use nut)
W Flange
• Safety wire pliers (Alternate: Safety cable tool)
• Torque wrench
• Torque wrench adapter
(Hartzell Propeller Inc. P/N AST-2877-1 as applicable)
C. Consumables
• Quick Dry Stoddard Solvent or Methyl-Ethyl-Ketone (MEK)
• Loctite 222 low strength threadlocker
