Electrofusion &
Electroporation System
Quick Start Guide
Unpacking the System
The shipping carton in which your ECM 2001+ System is packed has
been specifically designed to provide maximum protection to the
instrument during transportation and normal handling conditions.
Upon receipt, the carton should be examined for any external damage
resulting from shipment.
Open the carton and carefully remove the ECM 2001+ System and
inspect the unit for any apparent damage. Save the carton and packing
materials for future transportation and shipping requirements.
Packing Data
Check the packing slip to ensure that all items ordered and listed are
included in the shipment. Inform BTX immediately if any parts are
missing or damaged.
Power Source
As received, the instrument is ready for use with 100–240 VAC, 50/60 HZ.
The power requirements are 350 watts. In the USA, the power cord has
a standard three prong plug.
Installation
Once you have determined that the components of the system have
not sustained any obvious damage in shipment, proceed with the
installation.
Place the generator in a location that is a dry, level, sturdy surface free
from extremes in ambient temperature, dust or chemical exposure.
Allow the device to equilibrate to room temperature.
Allow unit to come to stable room temperature. Pull the plastic tab
from the battery holder at the bottom of the unit.
Connect the mains/power cord into the back panel at the bottom left.
Power up the system by pushing the rocker switch located on the back
panel. The display will flash the BTX logo. Once the software initializes,
the home screen will appear.
You are now ready to begin your work.
Main Menu
Electrofusion Icon
Takes you to Electrofusion
Main Menu.
Electroporation Icon
Takes you to Electroporation
Main Menu.
Download full user's manual at:
www.btxonline.com
BTX ECM 2001+ Quick Start Guide • www.btxonline.com
