T
+44 (0)1709 377172
F
+44 (0)1709 377173
E
sales@harvesthealthcare.co.uk
www.harvesthealthcare.co.uk
30
31
EMC
STATEMENT
USE OF PORTABLE TELEPHONES OR OTHER RADIO FREQUENCY
(RF) EMITTING EQUIPMENT NEAR THE SYSTEM MAY CAUSE
UNEXPECTED OR ADVERSE OPERATION
The Duke has been tested to EN60601-1-2:2007, regarding its ability to operate in an
environment containing other electrical/electronic equipment (including other medical devices).
The purpose of this testing is to ensure that the Duke is not likely to adversely affect the
normal operation of other such equipment and that other such equipment is not likely to
adversely affect the normal operation of the Duke
Despite the testing of the Duke that has been undertaken, normal operation of the Duke
can be affected by other electrical/electronic equipment and portable and mobile RF
communications equipment.
As the Duke is medical equipment, special precautions are needed regarding EMC
(electromagnetic compatibility).
It is important that the Duke is configured and installed/put into service, in accordance with
the instructions/guidance provided herein and is used only in the configuration as supplied.
Changes or modifications to the Duke may result in increased emissions or decreased
immunity of the harvest Duke in relation to EMC performance.
The Duke should not be used adjacent to or stacked with other equipment. If adjacent or
stacked use with other equipment is necessary, the Duke and the other equipment should be
observed / monitored, to verify normal operation in the configuration in which it will be used.
For the purposes of EN60601-1-2 the Duke has an essential performance (the Duke must
maintain required pressure within a tolerance of +/-10%).
1
The use of accessories, transducers and cables other than those specified, with
the exception of transducers and cables sold by the manufacturer of the equipment
or system as replacements for internal components, may result in increased
emissions or decreased immunity of the equipment or system.
2
The use of the accessory, transducer or cable with equipment and systems other
than the Duke may result in increased emissions or decreased immunity of the
equipment or system.
EMC
STATEMENT
GUIDANCE AND MANUFACTURER’S DECLARATION
– ELECTROMAGNETIC EMISSIONS
EMISSION TEST
COMPLIANCE
ELECTROMAGNETIC
ENVIRONMENT - GUIDANCE
RF emissions
CISPR 11
Group 1
RF emissions
CISPR 11
Class B
Uses RF energy only for its internal
function. Therefore, its RF emissions
are very low and are not likely to cause
any interference in nearby electronic
equipment.
Suitable for use in all establishments,
including domestic establishments and
those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes.
Harmonic emissions
IEC61000-3-2
Class A
Voltage fluctuations / flicker
emissions
IEC61000-3-3
Complies
The Duke is intended for use in the electromagnetic environment specified below. The
customer or the user of the harvest Duke should assure that it is used in such an environment.
