EXAMINATION AND
INSPECTION OF SLING
CAUTION
Before every lift visually examine the slings
structural integrity. If there is any sign of
excessive damage to the fabric or straps DO
NOT USE THE SLING.
GENERAL EXTERNAL WEAR
In normal use this is unavoidable and is shown
by fluffiness to the surface fibres. This may be
caused by sharp edges on straps or Velcro.
This is harmless unless it becomes too
extensive. Normal material condition is smooth
or flat.
LOCAL ABRASION IN THE WEBBING STRAPS
This may be caused by the passage of the
webbing over the sharp edges whilst under
tension or Velcro. Slight damage to the outer
fibres may be considered safe but in severe
cases this should lead to instant rejection of the
product.
CUTS, HOLES OR BURNS
These are dangerous and must lead to instant
rejection of the product.
EXAMINATION OF STITCH PATTERNS
Examine the stitch patterns for broken, worn,
pulled or unravelled stitches. Reject any
product where the thread has become subject
to excessive abrasion or broken stitches.
DO NOT USE
DO NOT USE
Critical stitch area on
all lifting straps
THIS MUST BE
INTACT
WASHING INSTRUCTIONS
Each sling can be laundered up to 80ºc using a
mild soap solution and then rinse. Slings will air
dry quickly in a warm room or in the normal
manner. Tumble dry on low setting only. Do not
place over a convector heater or steam pipes.
Do not use Biological detergents. Do not use
Bleach. Do not use strong chemicals. A faded
label is an early indicator that sling is subject to
harsh /abrasive cleaning methods do not
continue to use sling.
All slings fitted with a Velcro body belt should
have the Velcro square removed during
laundering and refitted afterwards. This will
significantly extend the lifespan of the product.
SAFE WORKING LOAD
Spacer - 300kg | Poly - 400kg | Mesh 300kg
| Parachute 200kg
SLING INSPECTION
Each product should be inspected prior to
each use and with your six month or annual
hoist inspection. This is in line with LOLER
(Lifting Operations and Lifting Equipment
Regulations)
SAFETY AND QUALITY STANDARDS
Care-ability Healthcare (manufacturer), are
registered with the Medicines and Health Care
Regulatory Agency of the UK Government to
manufacture Class 1 Medical Devices. Our
products are categorised as a Class 1 Medical
Device and carry the CE mark under the
European Medical Device Directive EU93-42. The
products are designed and manufactured under
the externally accredited BS EN ISO 9001:2008
quality system well beyond the requirements of
BS EN 10535:2006, The Hoist and Sling
Standard.
All of our products are thoroughly inspected by
two staff members prior to the product being
despatched. Our Lifestyle slings is labelled with a
unique serial number to assist with trace ability
and for recording LOLER examinations.
Harvest Healthcare, Sheaf House, Bradmarsh Way, Bradmarsh Business Park,
Rotherham, S601BW
t: 01709377172
|
f: 01709377172
|
e: enquiries@harvesthealthcare.co.uk
|
www.harvesthealthcare.co.uk
