18
6. Maintenance
Always disconnect power to the machine before doing maintenance. Failure to do this
may result in serious personal injury.
Cleaning filter:
Turn two “handles” (see
Fig.14
) right or left for several turns to clean the filter.
Once a week.
Deep clean:
Connect inlet port and cleaning port via 100mm flexible hose as
Fig. 14
. Run machine at 75Hz,
and keep turning handle H for 5-10 seconds. Repeat same process for another cleaning port.
Once 3 weeks.
.
Fig.14
Cleaning the gasket:
There is a sealing strip at the top of the dust bin, in order to maintain the seal and extend the life
of the sealing strip, you must keep it clean.
Wipe down each time after emptying dust bin
