11. Fit the lid prop
Parts
1 x aluminium lid prop
1 x M5 x 40mm bolt
1 x Nylok nut
The small section of 13mm (½”) angle
bolts to the inside of the front bar, on
the right hand side. Fix it loosely so it
can move around as it’s raised.
12. Connect the mister hose
Parts
1 x 1m water hose with elbow
at one end
TIP
: You will need to warm the ends of
the hose in hot water for a few seconds
to soften it before fitting.
After warming the ends, push the hose
onto the ridge irrigation pipe, and the
end with the elbow onto the
top
port
of the twin water valve which is fitted
to the lower front shelf.
Shown as the green hose here:
Secure with a jubilee clip.
