15. Attach the lid opener to the
frame
Parts
1 x Automatic lid opener
Put the lid prop away and clip the
mechanism into the bracket on the
rear of the front cross piece, above the
doors.
The two lugs on the opener fit into the
two corresponding holes in the bracket
on the back of the front cross piece.
16. Fit the rainwater collection hose
Parts
130cm clear 10mm ID hose
1 black filter washer
The long section of clear hose fits to
the bottom of the drain in the front
upper corner of the right hand panel,
and runs out through one of the holes
in the bottom part.
The black filter washer (with a mesh)
fits into the drain to help prevent
debris from getting into your tank.
17. Fix the greenhouse down
Now that you’ve completed the frame,
you should fix it firmly to something
solid, like a fence or wall.
Parts
2 angled securing brackets
Plus fixings [not supplied]
If you don’t have a firm structure to fix
it to, then it’s essential to have some
strong ground stakes attached to the
timber base.
