HASEL ÜTÜ SAN.TİC. ve LTD.ŞTİ. 9
Fix the machine to contact arm for protection grounding. If
the machine is not earthed manufacturer doesn’t bear
responsibility for any damage or injury occurred by lack of
rounding.
The power cable must be placed properly in order to prevent
being stepped on or being put anything on it. Check the cable
especially at out going points and connection points. Be careful
not to allow any bending or bowing on the cable
If the cable is damaged turn off the main switch. Do not
allow the machine to work with damaged cable. Let the
authorized electrician shift the cable.
User should not leave the machine alone while it is working.
After ironing, place hand iron on the hand iron mat.
Do not work machine upper 100°C long time. Table cover
can be burned.
Do not displace swivel arm.
Before start maintenance turn of main switch.
Do not touch hot places if the covers are removed at the
maintenance. Electric and steam output must be off.
Do not pull out the machine from grounding.
Do not start to work until fix cover.
The machine is under the acceptable noise merit. There is
no vibration and radiation spreading.
The machine can work in a closed area.
The machine can work b5-40 °C
IF THE USERS DO NOT FOLLOW THE CAUTIONS LISTED ABOVE
MANUFACTURER WILL NOT BE RESPONSIBLE OF ANY
ACCIDENT AND INJURIES
GENERAL SAFETY PRECAUTIONS
