For known print object thicknesses
Scale value Max. Print object
thickness
Print object
Print object
thickness
0
0.4 mm
Standard paper 80g/m²
Empty envelope
0.1 mm
0.4 mm
1
0.8 mm
Envelope filled with
standard paper, folded
3 times
0.7 mm
2 2.0
mm
3 3.5
mm
4 5.0
mm
5 6.0
mm
5.4.1.2
Setting the Media Width for the Sheet Separating System
1.
Turn both knurled knobs (1), each about 1-half turn away from the stop in
the middle position (see
H
Illustration
5-25).
2.
Unlock the knurled knob by turning
counter-clockwise
(2), lift it up and lock
it again by turning
clockwise
in a lifted position (see arrows).
3.
1.
2.
1
2
1
Illustration
5-25: Setting the paper feed
3.
Place a piece of the medium to be processed (3) under the lifted separating
fingers; two pieces, in the case of thin media. If the medium is so thin that it
possibly will not be reached by two separating fingers, then under the free
separating finger should also be placed a medium of the same thickness.
Non-compliance with these steps can lead to premature wear
(grooves) of the separation roller.
35
Summary of Contents for HJ700
Page 91: ...Weight 23 kg 91 ...
