SECTION 2
INSTALLING THE PRINTER
11
Connecting the Printer
Connecting Power
Check to make sure that he Main Power Switch [1] is in the
OFF
position.
Connect the AC power cord to the printer’s receptacle [1].
Connect the other end of the AC power cord to a 115 – 230 volt AC, 50/60 Hz,
grounded outlet.
Do NOT turn the printer on at this time.
NOTE
: The use of a surge protector/line conditioner is highly recommended.
CAUTION
DO NOT USE AN ADAPTER PLUG OR EXTENSION
CORD TO CONNECT THE PRINTER TO THE WALL
RECEPTACLE.
DO NOT USE OUTLETS CONTROLLED BY WALL
SWITCHES.
DO NOT USE AN OUTLET THAT SHARES THE
SAME CIRCUIT WITH LARGE ELECTRICAL
MACHINES OR APPLIANCES
.
Connecting to the Computer
The Printer connects to the computer through the USB port (2).
A Network (Ethernet) port (3) is provided for operation in a network environment.
NOTE
: At the time of this manuals publication, information on connecting the printer via the Network
(Ethernet) port was not available. Please contact your support representative for network connection help.
IMPORTANT:
Do NOT connect the printer to the computer, until prompted to do so, during the printer
driver installation process. See “
Installing the Printer Software
” section.
Minimum Computer System Requirements
•
Windows XP, Windows Vista, Windows 7. Supports 32 and 64 bit systems.
You must have administrative privileges on the system.
•
Pentium II, 2 GHz minimum (Pentium Dual Core, 2.5 GHz or better, is optimal)
•
System memory – 2 GB minimum; or as recommended for your operating system.
•
At least 10 GB free hard-disk space.
•
Microsoft Internet Explorer 6.0 or higher.
•
Java version 6 or higher
•
CD/DVD drive
•
USB 2.0 port