OPERATION
To begin press the “
ON/MODE
” button, pressing again toggles between
FREE RUN
and
HOLD
mode which is indicated by a dot at the top of the display. Unit remains on for
approximately 25 minutes until auto shut off operates
FREE RUN
displays continuous readings, updated at approximately 1 second intervals
PEAK HOLD
displays the highest reading sensed, until the mode switch is pressed
Low battery is indicated by a dot under BATT LOW. The dot will flash initially then stay on
steady when battery is very low
Current readings may not be accurate if low battery indicator is steady
The load spotter designed to be attached to the universal head of a hot line stick.
To activate back light, press and hold on/mode button until back light come on
Back light goes off in 5 minutes to conserve power
Display maybe manually turned off by press and hold on/mode button until display goes off
92 Advance Road, Toronto, Ontario M8Z 2T7
Telephone (416) 231-5535 FAX (416) 231-6184
E - M A I L : l o g m a s t e r @ b r o y . c o m
w w w . b r o y . c o m
Designed for use by utility personnel who require
a simple and, fast means of current measurement
on power lines which cannot be reached with a
conventional clip-on ammeter, or are carrying
high potentials. The load spotter is attached to the
universal head of a hot-line stick and slipped over
the live conductor. The range of conductors is
from 1/2 inch to 2 inches.
Two modes of operation are possible;
FREE RUN
which continuously displays the instantaneous
current value, or
PEAK HOLD
which retains
the highest reading obtained if the instrument
is positioned with the display out of view.
