No.:GC-JS-21 Version: 01/00
Effective date
：
2020-03-30
12
Minimum width of table L1
Left side to wall L2
Minimum Height
55mm
≥
100mm
0.7m
3.3.4 Installation table requirements: The installation table is strong enough to bear the weight
of the device and the sterilized object. The table can withstand at least 40kpa pressure.
Do not install the device in a closed cabinet; make sure that the shelf or table on which
the sterilizer is placed is strong enough; do not block the vent of the sterilizer.
3.3 Handling of packaged products
To ensure safe handling, please use a cart and similar tools to move the device. If there are no carts
or similar tools, at least two people are required to carry them in the front and back of the packing
box.
When handling by people, please pay special attention to avoid danger.
3.4 Unbox
After disconnecting the packing tape on the package with scissors, use a flat-blade screwdriver to
open the lock at the bottom of the box, remove the packaging cover, and finally remove the plastic
bag.
