background image

8

Form No. GRCSM-0401

1. PRODUCT WARRANTY

Hatco warrants the products that it manufactures (the
“Products”) to be free from defects in materials and
workmanship, under normal use and service, for a
period of one (1) year from the date of purchase
when installed and maintained in accordance with
Hatco’s written instructions. Buyer must establish the
product’s purchase date by returning Hatco’s
Warranty Registration Card or by other means
satisfactory to Hatco in its sole discretion.

Hatco warrants the following Product components to
be free from defects in materials and workmanship
from the date of purchase (subject to the foregoing
conditions) for the period(s) of time and on the
conditions listed below:

a) One (1) Year Parts and Labor PLUS One (1) 

Additional Year Parts-Only Warranty:

Toaster Elements (metal sheathed)
Drawer Warmer Elements (metal sheathed)
Drawer Warmer Drawer Rollers and Slides
Food Warmer Elements (metal sheathed)
Infra-Black

®

Elements (metal sheathed)

Display Warmer Elements (metal sheathed air heating)
Holding Cabinet Elements (metal sheathed air heating)
Cook and Hold Oven Elements (metal sheathed)

b) One (1) Year Parts and Labor PLUS Four (4) 

Additional Years Parts-Only Warranty on 
pro-rated terms that Hatco will explain at 
Buyer’s Request:

Powermite Gas Booster Heater Tanks
Mini Compact Tanks (stainless steel)
3CS and FR Tanks

c) One (1) Year Parts and Labor PLUS Four (4) 

Additional Years Parts-Only Warranty PLUS 
Five (5) Year Parts-Only Warranty on pro-
rated terms that Hatco will explain at Buyer’s 
Request:

Booster Heater Tanks (Castone

®

)

d) One (1) Year Parts-Only Warranty for 

components not installed by Hatco:

Accessory Components (including but not 
limited to valves, gauges and remote switches)

THE FOREGOING WARRANTIES ARE 
EXCLUSIVE AND IN LIEU OF ANY OTHER
WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE OR
PATENT OR OTHER INTELLECTUAL 
PROPERTY RIGHT INFRINGEMENT. Without
limiting the generality of the foregoing, SUCH 
WARRANTIES DO NOT COVER: Coated
incandescent light bulbs, fluorescent lamps, lamp
warmer heat bulbs, glass components or Product
failure in booster tank and fin tube heat exchanger
caused by liming, sediment buildup, chemical attack
or freezing in tanks, Product misuse, tampering or
misapplication, improper installation, application of
improper voltage, or recalibration of thermostats or
high limit switches.

2. LIMITATION OF REMEDIES AND 

DAMAGES

Hatco’s liability and Buyer’s exclusive remedy 
hereunder will be limited solely, at Hatco’s option, 
to repair or replacement by a Hatco-authorized 
service agency (other than where Buyer is located
outside of the United States or Canada, in which case
Hatco’s liability and Buyer’s exclusive remedy
hereunder will be limited solely to replacement of
part under warranty) with respect to any claim made
within the applicable warranty period referred to
above. Without limiting the generality of the
foregoing, all portable Products (as defined in N.S.F.
4-4.28.4) shall be delivered by Buyer, at its sole
expense, to the nearest Hatco-authorized service
agency for replacement or repair. Hatco reserves the
right to accept or reject any such claim in whole or in
part. Hatco will not accept the return of any Product
without prior written approval from Hatco, and all
such approved returns shall be made at Buyer’s sole
expense. HATCO WILL NOT BE LIABLE, UNDER
ANY CIRCUMSTANCES, FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES,
INCLUDING BUT NOT LIMITED TO LABOR
COSTS OR LOST PROFITS RESULTING FROM
THE USE OF OR INABILITY TO USE THE
PRODUCTS OR FROM THE PRODUCTS BEING
INCORPORATED IN OR BECOMING A
COMPONENT OF ANY OTHER PRODUCT OR
GOODS.

HATCO LIMITED WARRANTY

Summary of Contents for Glo-Ray GRCSCL-24













Reviews: