OPERATION
5
Form No. GRCSM-0401
The Carving Station power for the top ceramic heat and
the incandescent lights are controlled by the on/off
toggle switch. The switch must be in the “ON” position
for the unit to function. To control the top heat, set the
infinite switch to the desired heating level.
For models with heat in the base, power is
independently controlled by the on/off rocker switch.
Set base control thermostat to the desired heating level
as indicated on the control plate.
WARNING
Some exterior surfaces on the Carving Station will
get hot. Use caution when touching these areas to
avoid injury.
Figure 5. Controls
On/Off Toggle Switch
On/Off Rocker Switch
Base Control
Thermostat
Heat Control Infinite Switch
Summary of Contents for Glo-Ray GRCSCL-24
Page 11: ...NOTES 9 Form No GRCSM 0401 ...
