2
This manual provides the installation, safety, and operating
instructions for Glo-Ray
Designer
Foodwarmers. Hatco
recommends all installation, operating, and safety instructions
appearing in this manual be read prior to installation or operation
of the unit.
Safety information that appears in this manual is identified by
the following signal word panels:
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal
injury.
WARNING
NOTICE
CAUTION
INTRODUCTION
Hatco Glo-Ray
®
Designer
Infrared Foodwarmers ensure
maximum holding and minimize the risk of food-borne illness.
Optimum safety and quality is the result of food held at the
proper serving temperatures, using Glo-Ray’s pre-focused heat
patterns. The pre-focused heat pattern prevents foods from
being over-cooked in the middle and cooling off around the
edges by concentrating higher temperatures to the outer edges
of holding surfaces where heat loss is the greatest. Utilizing
specially designed reflectors to direct the heat from the
element, Glo-Ray safely maintains peak serving temperatures
longer, without continuing to cook the food.
The Glo-Ray
Designer
Foodwarmers are available with or
without shatter-resistant incandescent lights to illuminate the
warming area. These bulbs have a special coating that guards
against injury and food contamination in the event of breakage.
Hatco Glo-Ray
Designer
Foodwarmers are products of
extensive research and field testing. The materials used were
selected for maximum durability, attractive appearance, and
optimum performance. Every unit is inspected and tested
thoroughly prior to shipment.
Important Owner Information ..............................................2
Introduction...........................................................................2
Important Safety Information...............................................3
Model Description.................................................................4
Model Designation................................................................4
Specifications........................................................................5
Electrical Rating Chart — GR2A Models.............................5
Electrical Rating Chart — GR2A-XXD Models ....................9
Dimensions ........................................................................13
Installation...........................................................................14
General ..............................................................................14
Electrical Requirements.....................................................15
Remote Control Enclosures— RMB Series.......................16
Remote Control Enclosures— RMB2 Series.....................17
Operation.............................................................................18
General ..............................................................................18
Maintenance ........................................................................19
General ..............................................................................19
Daily Cleaning....................................................................19
Replacing Display Bulbs....................................................19
Troubleshooting Guide ......................................................20
Options and Accessories...................................................21
Limited Warranty.................................................................22
Authorized Parts Distributors .............................Back Page
IMPORTANT OWNER INFORMATION
Record the model number, serial number, voltage, and
purchase date of the unit in the spaces below (located near the
top of the inside of the leg). Please have this information
available when calling Hatco for service assistance.
Model No. ________________________________________
Serial No. ________________________________________
Voltage __________________________________________
Date of Purchase __________________________________
Register your unit!
Completing online warranty registration will prevent delay in
obtaining warranty coverage. Access the Hatco website at
www.hatcocorp.com
, select the
Parts & Service
pull-down
menu, and click on “Warranty Registration”.
Business
Hours:
7:00
AM
to 5:00
PM
Central Standard Time (CST)
(Summer Hours: June to September
—
7:00
AM
to 5:00
PM
CST Monday
–
Thursday
7:00
AM
to 4:00
PM
CST Friday)
Telephone: 800-558-0607; 414-671-6350
e-mail:
partsandservice@hatcocorp.com
Additional information can be found by visiting our web site at
www.hatcocorp.com
.
24 Hour 7 Day Parts and Service
Assistance available in the United States
and Canada by calling 800-558-0607.
Form No. GR2AM-1116
CONTENTS
English
