background image

CONTENTS

Form No. QTSM-0213

2

Safety information that appears in this manual is identified by

the following signal word panels:

WARNING indicates a hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION  indicates  a  hazardous  situation  which,  if  not

avoided, could result in minor or moderate injury.

NOTICE  is  used  to  address  practices  not  related  to

personal injury.

NOTICE

CAUTION

WARNING

INTRODUCTION

Hatco’s  Quick-Therm  Salamander  is  specially-designed  for

cooking,  grilling,  reheating,  and  keeping  foods  hot.  The

unparalleled start up speed is a direct result of Hatco’s patented

“instant on” heating elements located in the upper housing of

the salamander. The three independently-controlled heating

elements  provide  for  the  benefits  of  flexibility  and  energy

conservation. The plate detection feature, a versatile HOLD

function, and the reduced transfer of heat to the surrounding

area makes the Quick-Therm Salamander energy efficient and

easy to operate.
The Hatco Quick-Therm Salamander is a product of extensive

research and field testing. The materials used were selected

for maximum durability, attractive appearance, and optimum

performance. Every unit is inspected and tested thoroughly

prior to shipment.
This  manual  provides  installation,  safety,  and  operating

instructions  for  the  Quick-Therm  Salamander.  Hatco

recommends all installation, operating, and safety instructions

appearing  in  this  manual  be  read  prior  to  installation  or

operation of a unit.

Important Owner Information ..............................................2

Introduction...........................................................................2

Important Safety Information...............................................3

Model Description.................................................................4

Model Designation................................................................4

Specifications........................................................................5

Electrical Rating Chart........................................................5

Dimensions.........................................................................5

Installation.............................................................................6

General...............................................................................6

Installing a Wall-Mounted Unit............................................7

Electrical Connections........................................................7

Operation...............................................................................8

General...............................................................................8

Control Panel......................................................................8

Operating the Salamander .................................................8

Maintenance ........................................................................10

General.............................................................................10

Cleaning ...........................................................................10

Troubleshooting Guide.......................................................11

Limited Warranty.................................................Back Cover

IMPORTANT OWNER INFORMATION

Record  the  model  number,  serial  number,  voltage,  and

purchase date of the unit in the spaces below (specification

label located on the side of the unit near the power inlet area).

Please have this information available when calling Hatco for

service assistance.
Model No. ________________________________________
Serial No. ________________________________________
Voltage __________________________________________
Date of Purchase __________________________________

Register your unit!

Completing online warranty registration will prevent delay in

obtaining warranty coverage. Access the Hatco website at

www.hatcocorp.com

, select the 

Parts & Service

pull-down

menu, and click on “Warranty Registration”.

Business 8:00 

AM

to 5:00 

PM

Hours:

Central Standard Time (CST)
(Summer Hours:  June to September – 

8:00 

AM

to 5:00 

PM

CST Monday through Thursday

8:00 

AM

to 2:30 

PM

CST Friday)

Telephone: 414-671-6350
E-mail:

partsandservice@hatcocorp.com

Fax:

414-671-3976 (Parts and Service)

Additional information can be found by visiting our web site at

www.hatcocorp.com

.

Summary of Contents for quick-therm salamander qts series













Reviews: