background image

Form No. TMSCEM-0615

12

INTERNATIONAL LIMITED WARRANTy

1. PRODUCT WARRANTy

Hatco  warrants  the  products  that  it  manufactures  (the

“Products”)  to  be  free  from  defects  in  materials  and

workmanship, under normal use and service, for a period of one

(1)  year  from  the  date  of  purchase  when  installed  and

maintained in accordance with Hatco’s written instructions or

18 months from the date of shipment from Hatco. Buyer must

establish the Product’s purchase date by registering the Product

with Hatco or by other means satisfactory to Hatco in its sole

discretion.
Hatco warrants the following Product components to be free

from defects in materials and workmanship from the date of

purchase (subject to the foregoing conditions) for the period(s)

of time and on the conditions listed below:

a) Two (2) year Parts Warranty:

Conveyor Toaster Elements (metal sheathed)

Drawer Warmer Elements (metal sheathed)

Drawer Warmer Drawer Rollers and Slides

Strip Heater Elements (metal sheathed)

Display Warmer Elements (metal sheathed air heating)

Holding Cabinet Elements (metal sheathed air heating)

Heated Well Elements — HW and HWB Series

(metal sheathed)

b) Five (5) year Parts Warranty:

3CS and FR Tanks

c) Ten (10) year Parts Warranty:

Electric Booster Heater Tanks

Gas Booster Heater Tanks 

d) Ninety (90) Day Parts Warranty: 

Replacement Parts

THE FOREGOING WaRRaNTIES aRE ExClUSIVE aND IN

lIEU  OF  aNY  OTHER  WaRRaNTY,  ExPRESSED  OR

IMPlIED, INClUDING BUT NOT lIMITED TO aNY IMPlIED

WaRRaNTY OF MERCHaNTaBIlITY OR FITNESS FOR a

PaRTICUlaR  PURPOSE  OR  PaTENT  OR  OTHER

INTEllECTUal PROPERTY RIGHT INFRINGEMENT. Without

limiting the generality of the foregoing, SUCH WaRRaNTIES

DO NOT COVER: Coated incandescent light bulbs, fluorescent

lights, heat lamp bulbs, coated halogen light bulbs, halogen heat

lamp  bulbs,  xenon  light  bulbs,  lED  light  tubes,  glass

components, and fuses; Product failure in booster tank, fin tube

heat exchanger, or other water heating equipment caused by

liming, sediment buildup, chemical attack, or freezing; or Product

misuse, tampering or misapplication, improper installation, or

application of improper voltage.

2. LIMITATION OF REMEDIES AND DAMAGES

Hatco’s liability and Buyer’s exclusive remedy hereunder will be

limited solely to replacement of part or Product using, at Hatco’s

option, new or refurbished parts or Product by Hatco or a Hatco-

authorized service agency with respect to any claim made within

the applicable warranty period referred to above. Hatco reserves

the right to accept or reject any such claim in whole or in part.

In the context of this limited Warranty, “refurbished” means a

part  or  Product  that  has  been  returned  to  its  original

specifications by Hatco or a Hatco-authorized service agency.

Hatco will not accept the return of any Product without prior

written approval from Hatco, and all such approved returns shall

be  made  at  Buyer’s  sole  expense.  HaTCO  WIll  NOT  BE

lIaBlE, 

UNDER  aNY 

CIRCUMSTaNCES, 

FOR

CONSEQUENTIal OR INCIDENTal DaMaGES, INClUDING

BUT NOT lIMITED TO laBOR COSTS OR lOST PROFITS

RESUlTING FROM THE USE OF OR INaBIlITY TO USE THE

PRODUCTS  OR  FROM  THE  PRODUCTS  BEING

INCORPORaTED IN OR BECOMING a COMPONENT OF aNY

OTHER PRODUCT OR GOODS.

SERVICE INFORMATION

The warranty on THERM-Max Salamanders is for one year

from date of purchase or eighteen months from date of shipping

from Hatco, whichever occurs first.
If you experience a problem with a THERM-Max Salamander

during the warranty period, please do the following:

Contact Local Hatco Dealer

When  contacting  the  Hatco  dealer  for  service  assistance,

please  supply  the  dealer  with  the  following  information  to

ensure prompt processing:

• Model of unit
• Serial number (located on the side of the unit)
• Specific problem with the unit
• Date of purchase
• Name of business
• Shipping address
• Contact name and phone number

The Hatco dealer will do the following:

• Provide replacement part(s) as required
• Submit warranty claim to Hatco for processing

Non-Warranty Problems

If  you  experience  a  non-warranty  problem  that  requires

assistance,  please  contact  the  nearest  authorized  Hatco

Service agency.
To locate the nearest Service agency:

• access our website at 

www.hatcocorp.com

, select the

Resources

pull-down menu, and click on “Find Service

agent/Distributor”

• call Hatco Service at 414-671-6350
• e-mail Hatco Service at partsandservice@hatcocorp.com

Summary of Contents for TMS Series














Reviews: