6
C29
C28
A12
B30
B30
B30
B30
B13
B13
C29
C28
A01
B13
B30
B13
C05
C05
C05
C05
C05
C05
A12
A01
Adjusting the Adjustable Leveler
A02
B14
B14
B14
B14
B14
D06
D04
D05
D07
D06
ASSEMBLY
Step1. RearStabilizer Installation
1.) Attach the Guide Rail (A12) onto the tubes of the MainBody(A01) with 16 Bolts
M8x16mm(B13) and 16 Washers M8x20x1.5t(B30) that were removed.
2.) Assemble the Left and Right D Shape End Cap(C28/C29) into the tube of
the MainBody(A01) and Guide Rail(A12).
[Remove/Tighten bolts with the M5 Allen Wrench provided]
Step2.Adjusting the Adjustable Leveler
1.) Turn the Adjustable Levelers(C05) on the MainBody(A01)
and Guide Rail(A12) as needed to level the elliptical
trainer.
The elliptical trainer has to be leveled to prevent from wobbling or shaking during the exercise.
Step3. Front Post Installation
1.) Connect the Sensor With Cable(D05) from the
MainBody(A01)to the Sensor Cable(D04) from the Front Post
(A02) andcarefully tuck the wires into the MainBody(A01)
before attachingthe Front Post (A02) onto the MainBody(A01).
2.) Attach the Front Post (A02) onto the MainBody(A01) and fullytighten with 4
Bolts M8x20mm(B14).
