BCS-3000M
BURNER CONTROL SYSTEM
Table of Contents
SECTION DESCRIPTION
PAGE
A. General
Information
2
B.
Receiving and Inspection
3
C.
Drawings and Supplemental Literature
3
D. Installation
3
E. Adjustments
5
F. Final
Checkout
5
G. Operation
5
H. Troubleshooting
7
Appendix A
Fuel Motor Slidewire Calibration
10
Appendix B
UDC3200 Temperature Controller
11
Appendix C
High Temperature Limit
15
Appendix D
Exhaust Flow Limit Installation
16
Appendix E
Stack Thermocouple Installation
17
Appendix F
Material Thermocouple Installation
18
Appendix G
Recommended Spare Parts
19
Attachments: Appropriate Drawings and Schematics
WARNING
These instructions are intended for use only by experienced, qualified
combustion start-up personnel.
Adjustment of this equipment and its components, by unqualified personnel, can
result in fire, explosion, severe personal injury, or even death.
BCS-3000M-9
INSTRUCTIONS
These instructions are intended to serve as guidelines covering the installation, operation, and maintenance of Hauck equipment. While
every attempt has been made to ensure completeness, unforeseen or unspecified applications, details, and variations may preclude
covering every possible contingency.
WARNING: TO PREVENT THE POSSIBILITY OF SERIOUS BODILY INJURY, DO NOT USE OR
OPERATE ANY EQUIPMENT OR COMPONENT WITH ANY PARTS REMOVED OR ANY PARTS NOT APPROVED BY THE
MANUFACTURER.
Should further information be required or desired or should particular problems arise which are not covered
sufficiently for the purchaser’s purpose, contact Hauck Mfg. Co.
HAUCK MANUFACTURING CO.,
P.O. Box 90 Lebanon, PA 17042-0090 717-272-3051
8/07
www.hauckburner.com
Fax: 717-273-9882
