Operating instructions angular electrode and U-shaped electrode
Winkel- und U-Elektroden v02gb
Page 7
5
Remedy of defects
Any remedy of defects must be carried out by trained electricians only. The above mentioned
persons must have read the operating instructions and must follow the instructions, notes and
safety advice.
In case of defects regarding the power pack and the ionizing unit, please check for correct
installation first. If this does not solve the problem, please return the power pack together with the
ionizing unit for examination.
Danger!
High voltage!
Danger of fatal accidents!
Switch off the power pack before connecting
or disconnecting the coaxial connectors!
6
Maintenance and repairs
Danger!
High voltage!
Danger of fatal accidents!
This unit does not include any parts which can be maintained or repaired by the operator.
Should the unit prove defective or if a defect is suspected, switch off unit immediately and secure
against subsequent reuse.
6.1
Ionizing units
Clean at intervals of no more than 14 days using the special cleaning brush or the
special cleaning system (see Section 6.2 Accessories).
6.2
Accessories
PRX retaining plate
10.0400.001
Holder for angular electrode
10.0269.000
Holder for "U"-shaped electrode
10.0371.000
Special cleaning fluid
10.7220.000
Special cleaning brush
10.7218.000
Special cleaning system
10.7218.001
Circular brush for special cleaning system
X – 6822
