HAULOTTE GROUP
3 OPERATION
24
GROUND (LOWER) CONTROL PANEL (CONTINUED)
Figure 3-1. Ground (Lower) Control Panel
20. Auto
Level
LED
When this LED is “FLASHING” it indicates that the booms are not in the “stowed” position,
and the outriggers cannot be operated (non-functional). When this LED is “ON SOLID” it
indicates that the booms are in the “stowed” position, and the outriggers can be operated
(functional).
21-24. Outrigger
Controls
For simultaneous automatic outrigger extension / retraction of all four (4) outriggers: Select
the
EXTEND
(21)
button or
RETRACT
(22)
button and the
AUTO LEVEL
(23)
button at the same
time. To individually extend or retract the outriggers: Select the
EXTEND
(21)
button or
RETRACT
(22)
button, and one of the four
OUTRIGGER
(24)
buttons at the same time. The
outrigger indicator LEDs
(20)
lights up when the outriggers are properly deployed and the
aerial work platform weight is on the outrigger foot pads. Each of the outer outrigger LEDs
(25)
indicates load is on the outrigger foot pad. Each of the inner outrigger LEDs
(26)
, when
flashing, indicate that side is low, and needs to be further raised for leveling.
Summary of Contents for 3522A
