A
B
C
D
E
F
G
H
I
85
24203 3237 0
E 06 10
EN
E
- Driving
Engine-powered articulated lifts, 12 - 26 m
• State of the structure’s parts : Arm, boom, jib, cage (or platform) :
• No cracks, damaged paint.
• No distortion, visible damage.
• No foreign objects at the ends of the booms, between arms and link parts.
• Presence and check the original position of the platform control box sliding bar.
• State of the rotate systems : Turntable rotation, Turntable rotation selector in platform, Jib orientation
(For equipped machines).
• No excessive clearance : Refer to the Maintenance book.
• No missing screws or unscrewed.
• Absence of foreign objects on all surfaces.
• Greasing the turntable rotation gear Turntable and Platform.
• State of the tanks :
• No leaks.
• No missing or loose parts (bolts, nuts, connectors, cables, ec.). Top up the oil level, if necessary (Machine in
transport position).
• Sufficient fuel level.
2.1.2 - Environment
Section A - Safety precautions.
Check the following points :
• Wind speed (
Section G 1- Main characteristics).
• The permissible ground pressure and loading on the machine supporting surface (
Section G 1-
Main characteristics).
• The maximum permissible load in the platform (
Section G 1- Main characteristics).
• The maximum permissible lateral force allowed at the platform (
Section G 1- Main
characteristics).
2.2 - FUNCTIONAL TESTS
2.2.1 - Safety features
Features to be tested :
• Operation of the upper and lower emergency stop buttons.
• Operation of the tilt sensor.
• Visual and audible alarms.
• Platform load management system (Where fitted).
For functional test procedures refer to (
Section E 3.1- Test procedure).
