222
2420344510 E
11.11
AUS
Telescopic handlers
H
- Lubrication and maintenance
17.8 - SIDE-SHIFT FORK CARRIAGE (OPTION)
17.9 - WINCH : WINCH SUPPORT- 1,2 T (2646 LB) WITH HYDRAULIC WINCH (OPTION)
- WINCH SUPPORT- 2,4 T (5292 LB) WITH HYDRAULIC WINCH (OPTION)
Description of the wear :
The winch is deemed to be worn and requires changing when :
• The drum brake no longer holds the cable.
• And/or the drum no longer turns normally (worn bearings).
Changing the winch :
• The cable must be removed to change the winch (
Section H 16.7 ).
• When you have removed the cable, unscrew the 4 screws M12 on the winch.
17.10 - WINCH : FLY JIB 2,5 M(8 FT2 IN), 1,2 T (2646 LB) WITH HYDRAULIC WINCH
(OPTION) - FLY JIB 4 M(13 FT1 IN), 0,6 T (1323 LB) WITH HYDRAULIC WINCH
(OPTION)
Description of the wear :
The winch is deemed to be worn and requires changing when :
• The drum brake no longer holds the cable.
• And/or the drum no longer turns normally (worn bearings).
Changing the winch :
• The cable must be removed to change the winch (
Section H 16.7 ).
• When you have removed the cable, unscrew the 4 screws M12 on the winch.
The side-shift fork carriage must be replaced every 2000 h or every 3.
The fork carriage must be replaced by a qualified, authorised person. Contact HAULOTTE Services®.
Under normal conditions of usage, the winch must be replaced every 2000 h.
It is essential to change the self-locking nuts when reassembling the winch. Install new self-locking nuts.
Check the tightness of the winch nuts after installation and every 10 h of operation.
Under normal conditions of usage, the winch must be replaced every 2000 h.
It is essential to change the self-locking nuts when reassembling the winch. Install new self-locking nuts.
Check the tightness of the winch nuts after installation and every 10 h of operation.
Summary of Contents for HTL 3210
